| Welcome to the EuroTech UK Support Faq page. |
| A N S W E R | |||
| Product | Topic | Question | Answer |
| Apollo PCMCIA ISDN TA | Overview of Installation | How can I install the Apollo Pcmcia ISDN TA card correctly in my system? | DO NOT INSERT PCMCIA CARD IN SYSTEM 1. Install the RUN! ISDN Configuration Utility. 2. Insert the Intelligent ISDN TA PC Card to the free PCMCIA slot 3. Install the ISDN TA PC Card drivers. There are four Application Program Interfaces supported by the Intelligent ISDN TA PC Card (VCOMM, WinISDN, NDIS and CAPI 2.0), select one of the APIs for your applications. 4. Connect the ISDN network connection cable (U- or S/T-interface) to the ISDN TA PC Card's 15-pin connector. 5. Connect the ISDN phone line (RJ-45 phone cord) to the ISDN network connection cable and ISDN outlet on the wall. Note: If S/T-interface ISDN network connection cable is used, the ISDN phone cord should be connected between the ISDN network connections cable and NT1 device. 6. Your Intelligent ISDN TA PC Card installation is completed. How to Install NDIS, VCOMM, CAPI, WinISDN Driver You can skip this section if VCOMM, CAPI, and WinISDN had been installed, unless you want to change the API to NDIS for some purposes. Install Microsoft ISDN (MSISDN) Accelerator Pack version 1.1 or Microsoft Dial-Up Networking (MSDUN) version 1.2 before the NDIS driver suite installtion. Otherwise the driver installation will fail. 1. If any other APIs have been installed (VCOMM, WinISDN or CAPI), remove them, then install NDIS API. Click Uninstall menu in Utility Manager to remove the existed APIs then unplug the multifunction PC Card. 2. Install Microsoft ISDN Accelerator pack - run MSISDNxx.EXE (you can get more information about Microsoft Accelerator Pack from Microsoft's Web site at address http://www.microsoft.com/windows/getisdn/ ). Refer to Microsoft ISDN Accelerator Pack README.TXT for more details. 3. Plug the multifunction PC Card into any one of the free PCMCIA slots, Windows 95 will detect the PC card automatically. 4. Choose Driver from disk provided by hardware manufacturer, then insert the "ISDN TA NDIS/CONFIG" disk. Enter the correct drive path, eg. A:\ and click OK. The NDIS drivers will be installed automatically. Specify ISDN switch protocol, then enter ISDN phone numbers as well as SPIDs accordingly to complete the NDIS API installation. Skip the SPID settings when the ISDN TA PC Card in Europe |